View TLP3230_1326387.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TLP3230
TOSHIBA PHOTOCOUPLER PHOTO RELAY
TLP3230
MEASUREMENT INSTRUMENTS LOGIC IC TESTERS / MEMORY TESTERS BOARD TESTERS / SCANNERS
4.2 1.4
Unit: mm
The TOSHIBA TLP3230 is a super small-outline photorelay, suitable for surface-mount assembly. The TLP3230 consists of a GaAs infrared-emitting diode optically coupled to a photo-MOS FET and housed in a 4-pin package. Its characteristics also include low OFF-state current and low output pin capacitance, enabling it to be used in high-frequency measuring instruments.
3.5
1.7
1.8
0.15
0.2
3.8
0.2
1.27 2.04
0.3
0.46
0.2
FEATURES
* * * * * * * * 4 pin SSOP (SSOP4) 1-Form-A Peak Off-State Voltage Trigger LED Current On-State Current On-State Resistance Output Capacitance Isolation Voltage : 20 V (MIN.) : 4 mA (MAX.) : 160 mA (MAX.) : 8 (MAX.), 5 (TYP.) : 2.5 pF (MAX.), 1.0 pF (TYP.) : 1500 Vrms (MIN.) JEDEC EIAJ TOSHIBA Weight: 0.03 g : 1.8 mm high, 1.27 mm pitch
11-2A1
PIN CONFIGURATION (TOP VIEW)
1 4
2
1 : ANODE 2 : CATHODE 3 : DRAIN 4 : DRAIN
3
1
2004-1-8
TLP3230
MAXIMUM RATINGS (Ta = 25C)
CHARACTERISTIC Forward Current LED Forward Current Derating (Ta > 25C) = Reverse Voltage Junction Temperature DETECTOR Off-State Output Terminal Voltage On-State Current On-State Current Derating (Ta > 25C) = Junction Temperature SYMBOL IF IF/C VR Tj VOFF ION ION/C Tj Tstg Topr Tsol BVS RATING 50 -0.5 5 125 20 160 -1.6 125 -40~125 -20~85 260 1500 UNIT mA mA/C V C V mA mA/C C C C C Vrms
Storage Temperature Range Operating Temperature Range Lead Soldering Temperature (10 s) < Isolation Voltage (AC, 1 minute, R.H. = 60%) (NOTE1)
(NOTE1) : Device considered a two-terminal device : Pins 1 and, 2 shorted together, and pins 3 and 4 shorted together.
Caution
This device is sensitive to electrostatic discharge. When using this device, please ensure that all tools and equipment are earthed. This device is applying super small package which is free for Moisture-Proof packing. However, the application of this device is premised on use under controlled environmental condition like as measuring instrument. It is necessary to take precautions of storage condition and operating environmental condition.
RECOMMENDED OPERATING CONDITIONS
CHARACTERISTIC Supply Voltage Forward Current On-State Current Operating Temperature SYMBOL VDD IF ION Topr MIN. 10 25 TYP. MAX. 20 30 160 60 UNIT V mA mA C
INDIVIDUAL ELECTRICAL CHARACTERISTICS (Ta = 25C)
CHARACTERISTIC Forward Voltage LED Reverse Current Capacitance DETECTOR Off-State Current Capacitance SYMBOL VF IR CT IOFF COFF TEST CONDITION IF = 10 mA VR = 5 V V = 0, f = 1 MHz VOFF = 20 V, Ta = 50C V = 0, f = 100 MHz, t < 1 s MIN. 1.0 TYP. 1.15 15 1.0 MAX. 1.3 10 1000 2.5 UNIT V A pF pA pF
2
2004-1-8
TLP3230
COUPLED ELECTRICAL CHARACTERISTICS (Ta = 25C)
CHARACTERISTIC Trigger LED Current Return LED Current On-State Resistance SYMBOL IFT IFC RON TEST CONDITION ION = 100 mA IOFF = 10 A ION = 160 mA, IF = 5 mA, t < 1 s MIN. 0.2 TYP. 0.75 5 MAX. 4 8 UNIT mA mA
ISOLATION CHARACTERISTICS (Ta = 25C)
CHARACTERISTIC Capacitance Input to Output Isolation Resistance SYMBOL CS RS TEST CONDITION VS = 0 V, f = 1 MHz VS = 500 V, R.H. < 60% = AC, 1 minute Isolation Voltage BVS AC, 1 second (in oil) DC, 1 minute (in oil) MIN. 5 x 10
10
TYP. 0.8 10
14
MAX.
UNIT pF Vrms Vdc
1500
3000 3000
SWITCHING CHARACTERISTICS (Ta = 25C)
CHARACTERISTIC Turn-on Time Turn-off Time SYMBOL tON tOFF TEST CONDITION RL = 200 VDD = 10 V, IF = 5 mA (NOTE 4) MIN. TYP. 60 120 MAX. 500 500 UNIT s
(NOTE 4) : SWITCHING TIME TEST CIRCUIT
IF VDD IF VOUT 2 3 10% tON tOFF VOUT 90%
1
4
RL
3
2004-1-8
TLP3230
I F Ta
100
I ON Ta
280
Allowable On-sate current ION (mA)
(mA)
240 200 160 120 80 40 0 -20
80
Allowable forward current IF
60
40
20
0 -20
0
20
40
60
80
100
120
0
20
40
60
80
100
120
Ambient temperature Ta (C)
Ambient temperature Ta (C)
I F VF
100 50
Ta = 25 C
I ON VON
200 150
Ta = 25 C I F = 5 mA
I ON (mA) On-sate current
0.8 1 1.2 1.4 1.6 1.8
I F (mA)
30 10 5 3 1 0.5 0.3 0.1 0.6
100 50 0 -50 -100 -150 -200 -1 -0.5 0 0.5 1
Forward current
Forward voltage
VF
(V)
On-sate voltage VON (V)
RON Ta
10
I ON = 160 mA
I FT Ta
5
I ON = 100 mA
(mA) Trigger LED current I FT
20 40 60 80 100
On-sate resistance RON ()
8
I F = 5 mA t < 1s
4
t < 1s
6
3
4
2
2
1
0 -20
0
0 -20
0
20
40
60
80
100
Ambient temperature Ta (C)
Ambient temperature Ta (C)
4
2004-1-8
TLP3230
tON,tOFF I F
1000
Ta = 25 C
tON,tOFF Ta
250
V DD = 10 V, RL = 200
(s)
Switching time tON,tOFF (s)
300 100
V DD = 10 V,
RL = 200 t OFF
200
I F = 10 mA
Switching time tON,tOFF
150
t OFF
30 10
100
t ON
3 1 1
t ON
50
3
10
30
100
0 -20
0
20
40
60
80
100
Forward current
I F (mA)
Ambient temperature Ta (C)
I OFF VOFF
15
Ta = 25 C
C OFF VOFF
1
Ta = 25 C
(pA)
I OFF
10
Output terminal capacitance COFF / COFF (0V)
0.8
0.6
Off-state current
0.4
5
0.2
0
5
10
15
20
0
10
20
30
Off-state output voltage VOFF (V)
Off-state output voltage VOFF (V)
5
2004-1-8
TLP3230
OUTLINE DRAWING
4.2 1.4
Unit Tolerance
0.1
3.5
1.7
1.8
0.15
0.2
3.8
0.2
1.27 2.04
0.3
0.46 0.2

: ANODE : CATHODE : DRAIN : DRAIN
RESTRICTIONS ON PRODUCT USE
* The information contained herein is subject to change without notice.
030619EBC
* The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * The products described in this document are subject to the foreign exchange and foreign trade laws. * TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law and regulations. * GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically.
6
2004-1-8

▲Up To Search▲

Price & Availability of TLP3230

	To Download TLP3230 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .